paper&threadA JOURNAL FOR HANDMADE DAYSA little about us ↗

A PRACTICAL HANDMADE PROJECT

Make a Cardboard Coaster Storage Holder

A small holder keeps dry coasters together on a shelf. It is a storage project and is not intended to hold wet or hot items.

Paper & Thread editorial · October 19, 2026

Start with your materials ↓
AI-generated concept image for make a cardboard coaster storage holder

WHAT TO GATHER

Your starting kit.

  • Clean small cardboard box
  • Coasters
  • Ruler
  • Pencil
  • Scissors

STEP 01

Prepare the starting piece

Stack the clean dry coasters and measure their combined width and height. Choose a small box with enough clearance to lift the stack easily.

STEP 02

Set out the shape

Lower the front wall if needed while keeping the base intact. Trim with suitable scissors and smooth the edge where fingers will reach.

STEP 03

Work the first section

Add a folded card divider if you want to separate two sizes. Fit it loosely so it does not press against the coaster edges.

STEP 04

Build and adjust

Place a removable flat paper liner on the bottom. Avoid absorbent layers that could hide moisture from a damp coaster.

STEP 05

Finish and check

Return coasters only when fully dry and cool. Replace the holder if it softens or becomes stained rather than storing damp items inside it.

Before you begin.

What should I check before beginning?

Stack the clean dry coasters and measure their combined width and height. Choose a small box with enough clearance to lift the stack easily.

What is the main practical tip for this project?

A cardboard holder should not be used as a coaster beneath a hot cup.

Original editorial project guidance. Images are AI-generated concepts, not photographs of tested finished projects. Practice on inexpensive materials and follow tool and material instructions. Sources & approach.

Save to Pinterest ↗

More cardboard projects ↗

KEEP THE THREAD GOING

Try something next.