A PRACTICAL HANDMADE PROJECT
Make a Paper Strip Spiral Ornament
A paper spiral gives a simple hanging shape without complex folded points. Make a short lightweight version for an adult craft area.
Start with your materials ↓
WHAT TO GATHER
Your starting kit.
- Colored paper
- Pencil
- Scissors
- Short cotton twine
STEP 01
Prepare the starting piece
Draw a broad spiral inside a paper circle, leaving generous spacing between the lines. Stop before reaching a very tiny fragile center.
STEP 02
Set out the shape
Cut from the outer edge along the spiral line slowly, turning the paper as needed. Keep the band width roughly even throughout.
STEP 03
Work the first section
Lift the center gently and let the outer coils relax. Avoid stretching the paper, which can tear narrow sections or create sharp folds.
STEP 04
Build and adjust
Make a small hole through the broad center and attach a short cotton loop. Test the hole on scrap if the paper is delicate.
STEP 05
Finish and check
Suspend it briefly from a suitable indoor fixing and check it hangs freely. Keep it clear of fans, heaters, and children or pets.
Before you begin.
What should I check before beginning?
Draw a broad spiral inside a paper circle, leaving generous spacing between the lines. Stop before reaching a very tiny fragile center.
What is the main practical tip for this project?
This is a light decorative piece; remove it if it tears rather than adding a long tangled repair cord.
Original editorial project guidance. Images are AI-generated concepts, not photographs of tested finished projects. Practice on inexpensive materials and follow tool and material instructions. Sources & approach.
Save to Pinterest ↗KEEP THE THREAD GOING
