Make a Fabric Pocket for Index Cards

WHAT TO GATHER

Your starting kit.

Clean, prewashed woven cotton or other fabric suitable for the project
A hand-sewing needle and compatible thread
Fabric scissors, ruler, pins or clips, and a removable marking tool
Any insert, lining, cord, or closure described in the steps

STEP 01

Measure and prepare

Measure a stack of index cards and add 15 mm ease plus two 10 mm side allowances.

STEP 02

Lay out the construction

Cut one long rectangle twice the card height plus 40 mm for two top hems. Hem both short ends before folding.

STEP 03

Join and shape

Fold wrong sides together with the hems at the opening and sew the side seams, then finish their exposed edges with overcasting.

STEP 04

Check the result

Keep the pocket slightly loose so a full card stack can slide in without folding its corners. Turn the piece gently and inspect every seam from both sides. Check that the intended item fits without stretching the opening. Close any turning gap with small secure stitches and remove pins before placing the accessory in use.

STEP 05

Finish and keep

Trim loose thread ends and keep any care information with the fabric. Test washing only according to the materials and insert instructions, removing removable inserts first. Store the piece dry and mend an opening seam before using it again.

Before you begin.

Can I use stretchy fabric instead?

The instructions start with woven fabric because it is easier to measure and hand sew consistently. A stretch fabric can change the fit and needs a suitable seam and needle; make a separate test rather than substituting it directly.

What should I check before beginning?

Keep the pocket slightly loose so a full card stack can slide in without folding its corners.

Original editorial project guidance. Images are AI-generated concepts, not photographs of tested finished projects. Practice on inexpensive materials and follow tool and material instructions. Sources & approach.

Save to Pinterest ↗

More fabric accessories ↗